Granolala Sample Packet Dispenser, Pillar Sign
As part of our Retail Merchandising Kit we may provide a vertical 'pillar' sign for our Granolala Sample Packet Dispenser.
This is intended to be a visually attractive element, drawing attention to the nearby Granolala products and highlighting the Sample Packets of Granolala being offered.
It may arrive at your store assembled and ready to display, or it may arrive flat, as a kit.
Tip: After assembling and displaying your Sample Pillar sign, click here for tips on Selling Granolala in your store.
Tips
Always keep the Sample Dispenser full or nearly full.
This encourages customers to take samples.
Sample Packets should have the label facing forward with the Granolala logo at the top.
If you have more than one Refill pouch of Granolala Sample Packets, always check the date code on the back labels and refill using the older Sample Packets first.
Thank you for supporting Granolala and helping us grow together!
Customers can scan the QR code on a Sample Packet, or the QR code on the pillar sign. Both link to additional information about Granolala and the Samples we offer.
Assembly
The photos below outline the steps to assemble a Granolala pillar sign from flat, and show how the finished pillar would appear.
Note: There may be detail changes as the visual elements are updated.
The overall method should be similar.
Please request additional Pillar Signs and Granolala Sample Packet Dispensers if you have places to use them.
Flat kit sheet in foreground, assembled pillar behind.
Carefully curve the sheet and tuck the edge into the fold.
Make sure the edge is fully tucked into the fold, and the top edges are aligned (left edges in above photo).
Fold the sticky tape against the curved surface.
Check that it is properly in position then press firmly along the taped seam to fully activate the adhesive.
Tip: Some of the ink colour may flake away along the hard fold line.
Try to minimize the damage to the colour layer.
Position the pillar into the sample packet dispenser.
You may need to press down on the flap to fully seat the bottom flap into the dispenser.
View of the seam side.
The bottom curved edge of the pillar should sit on the shelf surface, so the pillar stands upright and is stable.
